1. print icon Drucken

FeatherLight™ Carbon Fiber Live Shaft Idler Rolls

  •  High strength and low weight
  •  Higher load capacity than comparable aluminum idlers
  •  Lowest inertia ratings of any idler
  •  Non-corrosive
  •  Electrically conductive

Live Shaft Carbon Fiber Idler Specifications

  • Materialcarbon fiber/epoxy composite tubing machined for minimum stock removal
  • Fertigstellung32 Ra
  • Geradheitover face width within 0.004 inch
  • dynamisch ausballanciert mit*3000 FPM
  • Zapfenmaterial1018 carbon steel
  • Zapfendurchmesser25,4 mm1 inch
  • Zapfenlänge101,6 mm4 Zoll
  • Zapfenrundlauf bezogen auf den Außendurchmesser0,13 mm0,005 Zoll

*Unless otherwise specified

The following standard models are provided for ease of ordering. Custom configurations are available.

Use the Specifying Graph (included below each standard model) to determine if your specifications fall within safe or acceptable parameters. The light blue bands identify the maximum safe operating speeds for given load and face widths. If your criteria places you in the yellow band, call the Webex customer support team to assist you in sizing your roll. If your specifications place you near band borders — or do not fit the parameters suggested in these graphs — call us at (920) 720-6666 for help. Have information ready on speed, web tension and wrap angles.

LSC-300-100 Specifications

LSC-300-100 Dimensions
LSC-300-100 Chart
  • Nominale Walzendurchmesser76,2 mm3 Zoll
  • Wandstärke3,18 mm0,125 Zoll
  • Leitwalzengewicht (lb)1.40 + (0.07 x Inches Face Length)

LSC-400-100 Specifications

LSC-400-100 Dimensions
LSC-400-100 Chart
  • Nominale Walzendurchmesser101,6 mm4 Zoll
  • Wandstärke3,18 mm0,125 Zoll
  • Leitwalzengewicht (lb)2.67 + (0.09 x Inches Face Length)

 

 

LSC-500-100 Specifications

LSC-500-100 Dimensions
LSC-500-100 Chart
  • Nominale Walzendurchmesser127 mm5 Zoll
  • Wandstärke3,18 mm0,125 Zoll
  • Leitwalzengewicht (lb)3.33 + (0.11 x Inches Face Length)

 

 

LSC-600-100 Specifications

LSC-600-100 Dimensions
LSC-600-100 Chart
  • Nominale Walzendurchmesser152,4 mm6 Zoll
  • Wandstärke3,18 mm0,125 Zoll
  • Leitwalzengewicht (lb)5.40 + (0.13 x Inches Face Length)

 

 

LSC-800-100 Specifications

LSC-800-100 Dimensions
LSC-800-100 Chart
  • Nominale Walzendurchmesser203,2 mm8 Zoll
  • Wandstärke3,18 mm0,125 Zoll
  • Idler Weight7.20 + (0.18 x Inches Face Length) lbs

 

 

Webex Carbon Composite Idlers are unmatched for their combined qualities of strength and low weight - only a third of the weight of a comparable standard aluminum idler with 1.2 times the load bearing capacity. These high performance idlers use carbon fiber composite tubing for the roll shell. A special steel stub-shaft and lightweight aluminum headers keep total roll weight to a minimum.

These remarkable idlers are ideal for running wider, lighter weight webs at higher critical speeds. Inertia ratings are the lowest of any roller on the market. Best of all, you can specify them now as a Webex standard - saving you the expense of a custom carbon composite idler.

Webex Centers of Excellence

State-of-the-art centers of manufacturing excellence for Webex Precision Rolls