1. print icon Print

Shafts for Dead Shaft Idler Rolls

  • Ready to install
  • Faced and chamfered ends
  • Drilled and tapped ends available
  • Easy, single source ordering

Shaft Specifications for Dead Shaft Idler Rolls

  • Shaft Weight
  • 0.75 inch diameter0.125 lbs per inch
  • 1.00 inch diameter0.233 lbs per inch
  • 1.25 inch diameter0.348 lbs per inch
  • 1.50 inch diameter0.501 lbs per inch
  • 2.00 inch diameter0.890 lbs per inch
  • Standard Drilling and Tapping Specifications
  • 0.75 inch diameter3/8-16 UNC x. 3/4 inch deep
  • 1.00 inch diameter1/2-13 UNC x 1 inch deep
  • 1.25 inch diameter1/2-13 UNC x 1 inch deep
  • 1.50 inch diameter1/2-13 UNC x 1 inch deep
  • 2.00 inch diameter3/4-10 UNC x 1 inch deep

Our Standard Steel Shafts are simply faced and chamfered or drilled and tapped for mounting through a frame. There's a shaft option here to meet most applications and installations. Stainless Steel Shafts are made from Bearing Quality Type 303 Annealed and Centerless Ground Stainless Steel. Typical diameter tolerances are .0005/.0020" under the specified size.