1. print icon imprimer

FeatherLight™ Carbon Fiber Live Shaft Idler Rolls

  •  High strength and low weight
  •  Higher load capacity than comparable aluminum idlers
  •  Lowest inertia ratings of any idler
  •  Non-corrosive
  •  Electrically conductive

Live Shaft Carbon Fiber Idler Specifications

  • Materialcarbon fiber/epoxy composite tubing machined for minimum stock removal
  • Finitions32 Ra
  • Rectitudeover face width within 0.004 inch
  • équilibré dynamiquement*3000 FPM
  • Journal Material1018 carbon steel
  • Journal Diameter25,4 mm1 avancer doucement
  • Journal Length101,6 mm4 pouces
  • Journal Runout to roll O.D. within0,13 mm0,005 pouces

*Unless otherwise specified

The following standard models are provided for ease of ordering. Custom configurations are available.

Use the Specifying Graph (included below each standard model) to determine if your specifications fall within safe or acceptable parameters. The light blue bands identify the maximum safe operating speeds for given load and face widths. If your criteria places you in the yellow band, call the Webex customer support team to assist you in sizing your roll. If your specifications place you near band borders — or do not fit the parameters suggested in these graphs — call us at (920) 720-6666 for help. Have information ready on speed, web tension and wrap angles.

LSC-300-100 Specifications

LSC-300-100 Dimensions
LSC-300-100 Chart
  • Diamètre Rouleau Nominal 76,2 mm3 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage1.40 + (0.07 x Inches Face Length)

LSC-400-100 Specifications

LSC-400-100 Dimensions
LSC-400-100 Chart
  • Diamètre Rouleau Nominal 101,6 mm4 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage2.67 + (0.09 x Inches Face Length)



LSC-500-100 Specifications

LSC-500-100 Dimensions
LSC-500-100 Chart
  • Diamètre Rouleau Nominal 127 mm5 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage3.33 + (0.11 x Inches Face Length)



LSC-600-100 Specifications

LSC-600-100 Dimensions
LSC-600-100 Chart
  • Diamètre Rouleau Nominal 152,4 mm6 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage5.40 + (0.13 x Inches Face Length)



LSC-800-100 Specifications

LSC-800-100 Dimensions
LSC-800-100 Chart
  • Diamètre Rouleau Nominal 203,2 mm8 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Idler Weight7.20 + (0.18 x Inches Face Length) lbs



Webex Carbon Composite Idlers are unmatched for their combined qualities of strength and low weight - only a third of the weight of a comparable standard aluminum idler with 1.2 times the load bearing capacity. These high performance idlers use carbon fiber composite tubing for the roll shell. A special steel stub-shaft and lightweight aluminum headers keep total roll weight to a minimum.

These remarkable idlers are ideal for running wider, lighter weight webs at higher critical speeds. Inertia ratings are the lowest of any roller on the market. Best of all, you can specify them now as a Webex standard - saving you the expense of a custom carbon composite idler.

Webex Centers of Excellence

State-of-the-art centers of manufacturing excellence for Webex Precision Rolls