1. print icon imprimer

Steel Dead Shaft Idler Rolls

  • Economical
  • Easy to install
  • High strength
  • Resists nicks and deformation
  • Dynamically balanced up to 2,000 FPM
  • Readily modified with custom coatings and surface treatments
  • Special low-friction bearings installed
  • Ultra low-friction, oil-lubricated bearings optional
  • Repeat performance, roll to roll and order to order

Webex Dead Shaft Steel Specifications

  • Material1026 carbon steel tubing machined for minimum stock removal
  • Finitions32 Ra
  • Runout and Straightnesswithin the greater of 0.002 inch or 0.0005 inch/ft. of length
  • BalancedDynamically balanced to standard specification or your specified line speed

S-250-100 Specifications

S-250-100 Dimensions
  • Diamètre Rouleau Nominal 63,5 mm2,5 pouces
  • Wall Thickness6,35 mm0,25 pouces
  • Dynamically Balanced at1,000 fpm
  • Poids des rouleaux de guidage1.10 + (0.45 x Face Length inches) w/o shaft
  • Generally available in Face Lengths up to60 inches
  • Roulements à faible friction*installed for a 1 inch diameter shaftinstalled for a 25.4 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • S-250-7519,05 mm0,75 pouces

S-300-100 Specifications

S-300-100 Dimensions
  • Diamètre Rouleau Nominal 76,2 mm3 pouces
  • Wall Thickness4,76 mm0,1875 pouces
  • Dynamically Balanced at1,500 fpm
  • Poids des rouleaux de guidage2.07 + (0.40 x Face Length inches) w/o shaft
  • Generally available in Face Lengths up to75 inches
  • Roulements à faible friction*installed for a 1 inch diameter shaftinstalled for a 25.4 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • S-300-7519,05 mm0,75 pouces
  • S-300-1251.25 inches

S-350-150 Specifications

S-350-150 Dimensions
  • Diamètre Rouleau Nominal 88,9 mm3,5 pouces
  • Wall Thickness4,76 mm0,1875 pouces
  • Dynamically Balanced at1,500 fpm
  • Poids des rouleaux de guidage3.62 + (0.47 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to84 inches
  • Roulements à faible friction*installed for a 1.5 inch diameter shaftinstalled for a 38.1 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • S-350-7519,05 mm0,75 pouces
  • S-350-10025,4 mm1 avancer doucement
  • S-350-1251.25 inches

S-400-125 Specifications

S-400-125 Dimensions
  • Diamètre Rouleau Nominal 101,6 mm4 pouces
  • Wall Thickness6,35 mm0,25 pouces
  • Dynamically Balanced at1,500 fpm
  • Poids des rouleaux de guidage4.66 + (0.75 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to84 inches
  • Roulements à faible friction*installed for a 1.25 inch diameter shaftinstalled for a 31.75 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • S-400-7519,05 mm0,75 pouces
  • S-400-10025,4 mm1 avancer doucement
  • S-400-1501.50 inches

S-500-200 Specifications

S-500-200 Dimensions
  • Diamètre Rouleau Nominal 127 mm5 pouces
  • Wall Thickness6,35 mm0,25 pouces
  • Dynamically Balanced at2,000 fpm
  • Poids des rouleaux de guidage9.80 + (0.95 x Inch Face Length) w/o shaft
  • Roulements à faible friction*installed for a 2 inch diameter shaftinstalled for a 50.8 mm diameter shaft
  • Generally available in Face Lengths up to120 inches
  • Also Available with Bearings for the Following Shaft Diameters
  • S-500-7519,05 mm0,75 pouces
  • S-500-10025,4 mm1 avancer doucement
  • S-500-1251.25 inches
  • S-500-1501.50 inches

S-600-200 Specifications

S-600-200 Dimensions
  • Diamètre Rouleau Nominal 152,4 mm6 pouces
  • Wall Thickness7,94 mm0,3125 pouces
  • Dynamically Balanced at2,000 fpm
  • Poids des rouleaux de guidage11.36 + (1.45 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to130 inches
  • Roulements à faible friction*installed for a 2 inch diameter shaftinstalled for a 50.8 mm diameter shaft
  • S-600-7519,05 mm0,75 pouces
  • S-600-10025,4 mm1 avancer doucement
  • S-600-1251.25 inches
  • S-600-1501.50 inches

*Other shaft configurations and wall thicknesses optional.

Webex Carbon Steel Idlers have the strength to withstand substantial loading from nips or web tension. They also perform well in elevated temperatures up to 350ºF. The DOM tubing of our steel idlers resists nicks and deformation. And when compared to similar sized aluminum rolls, steel idlers are less expensive.

For economy, strength, and high performance, nothing beats a Webex standard dead shaft steel idler.

Webex Centers of Excellence

State-of-the-art centers of manufacturing excellence for Webex Precision Rolls