1. print icon imprimer

UltraLight™ Aluminum Dead Shaft Idler Rolls

  • Low break-away torques ideal for low-wrap, low-tension applications
  • Double bearings at each end keep stub-shafts true to roll
  • Small diameter bearings for free running performance
  • Dynamically balanced for high speeds

Webex Dead Shaft Ultralight Aluminum Specifications

  • Material6061-T6 aluminum tubing machined for minimum stock removal and bored for 1/8 inch retained wall thickness
  • Finitions32 Ra
  • Runout and Straightnesswithin the greater of 0.002 inch or 0.0005 inch/ft. of length

UL-300-050 Specifications

UL-300-050 Dimensions
  • Diamètre Rouleau Nominal 76,2 mm3 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage1.40 + (0.11 x Inch Face Length)
  • Dynamically Balanced at1,500 fpm
  • Low-friction Bearingsinstalled for a 0.5 inch diameter steel stub-shaftinstalled for a 12.7 mm diameter steel stub-shaft
  • Generally available in Face Lengths up to48 inches

UL-450-063 Specifications

UL-450-063 Dimensions
  • Diamètre Rouleau Nominal 114,3 mm4,5 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage3.00 + (0.17 x Inch Face Length)
  • Dynamically Balanced at1,500 fpm
  • Low-friction Bearingsinstalled for a 0.625 inch diameter steel stub-shaftinstalled for a 15.88 mm diameter steel stub-shaft
  • Generally available in Face Lengths up to72 inches

UL-600-075 Specifications

UL-600-075 Dimensions
  • Diamètre Rouleau Nominal 152,4 mm6 pouces
  • Wall Thickness3,18 mm0,125 pouces
  • Poids des rouleaux de guidage5.40 + (0.23 x Inch Face Length)
  • Dynamically Balanced at2,000 fpm
  • Low-friction Bearingsinstalled for a 0.75 inch diameter steel stub-shaftinstalled for a 19.05 mm diameter steel stub-shaft
  • Generally available in Face Lengths up to96 inches

Much lighter than Standard Aluminum Idlers ... even lighter than our LightWeight Aluminum Idlers ... Webex UltraLights are the ultimate in low-weight, high-performance aluminum idlers. Thanks to precision engineering and machining, the Webex UltraLight offers break-away torques as low as 0.2 oz.-in. This low-inertia idler is ideal for low-wrap, low tension applications — in particular, wherever web slippage is unacceptable. UltraLights weigh as much as 60% less than Standard Aluminum Idlers — 25% less than Webex LightWeights. Each UltraLight™ is made entirely of aluminum except for bearings and shafts.

Webex Centers of Excellence

State-of-the-art centers of manufacturing excellence for Webex Precision Rolls