1. print icon 印刷

Fife DSS Digital Sensing System

The digital detector from Fife is a non-contact, photoelectric control used to sense the process material edge or centerline in various guiding applications and can provide width measurement for the aforementioned applications or as a stand alone width measurement system.

DSS Digital Sensing System Specifications

  • 供給電源12 V dc at 250 mA
  • Signal outputDigital pulse
  • Operating temperature range32-122° F
    0-50° C
  • LensLexan
  • InterfaceFife H3740
  • HousingAnodized; aluminum extrusion
  • GasketingClosed cell neoprene and buna-N
  • On-Line Balance Module H3650- 100Available if on-site calibrations is desired
  • Cable length (receiver to emitter)Receiver has 2 feet of cable. Use 15 foot extension cable P/N H3710-3700-15. All connections are plug-in type.
  • AccuracyTypical ±0.01 (0.25 mm)/edge

The digital detector from Fife is a non-contact, photoelectric control used to sense the process material edge or centerline in various guiding applications and can provide width measurement for the aforementioned applications or as a stand alone width measurement system.

English

Maxcess Fife logo

Fife Engineering prepares a customer specific manual for most Fife systems when they ship. To access a copy of your manual, please choose the following link. Doing so will take you out of this website and into the Fife Customer Specific Maintenance Manual login area.

Access Order-Specific Manuals