MAGPOWR TR-5

  • Precision tension meter for direct tension readout
  • 8:1 calibration range
  • Tare adjustment of 50% load cell rating
  • Overall system accuracy better than 1%
  • Auxilary 0 to 10 VDC or 4 to 20 mADC output
  • Operates with either one or two load cells
  • Easy to install and calibrate
  • Improved productivity by eliminating operator dependency
  • Improved quality through reproducible correct machine settings
  • Switch selectable 115/230 VAC input

MAGPOWR TR-5 Specifications

  • 입력 서플라이115/230 VAC ± 10%, 50/60 Hz, switch selectable, 6VA
  • Tension Input0 to 21 mV (one or two 350 Ω full bridges), 0 to 500 mV (one 120 Ω full bridge), selectable
  • 출력0 to 10 VDC or 4 to 20 mADC
  • 온도 드리프트Maximum null drift .005% of load cell rating per °C. Maximum gain drift .02% of reading per °C
  • Load Cell Excitation5 or 10 VDC
  • GainCalibrates meter (full scale) with load cell loading from 1/8 to full rating
  • Zero (Tare)Up to 50% of combined load cell rating
  • Meter4 inch x 6 inch, 1 mADC scaled 0 to 100%
  • 오퍼레이팅 온도0 to 40˚ C32 to 104˚ F
  • Storage Temperature-30 to 65˚ C-22 to 149˚ F
  • 무게5.5 kg12 lb

The MAGPOWR TR-5 Tension Readout is a device for measuring tension in a moving web, strand, wire or narrow tape. It uses either one or two MAGPOWR load cells and interconnection cables.

This system can be used on any non-driven idler roll or at any position where the wrap angle of the web or strand does not change. Each load cell contains four foil type strain gages bonded to a sensing beam. These gages convert the load on the roll or sheave to an electrical signal. Within the TR-5, the signal from the load cells is amplified and displayed on the tension meter.

The amplifier of the TR-5 has low drift and high linearity, with a gain control range of 8:1 and tare adjustment of 50%. An auxiliary 0 to 10 VDC, or 4 to 20 mADC output is provided for interfacing to other products or systems.

English

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"