1. print icon 인쇄

MAGPOWR PA-90 and PA-2 Power Amplifiers

  • Control and size magnetic particle clutch or brake
  • Output is current-regulated for better system response
  • Selectable operating current ranges for optimum controllability
  • Easily mounts inside a VERSATEC enclosure
  • Reverse current to extend torque range is standard
  • UL and CE Approved

MAGPOWR PA-90 and PA-2 Specifications

  • PA-90
  • 입력115 VAC ±10%, 50/60 Hz
  • 출력-3.6 to 90 VDC, with selectable
    current ranges 1/8, 1/4, 1/2 amp maximum
  • PA-2(90 VDC Brakes and Clutches)
  • 입력115 VAC ±10%, 50/60 Hz
  • 출력-3.6 to 90 VDC, with selectable
    current ranges 1/8, 1/4, 1/2 amp maximum
  • PA-2 (24 VDC Brakes and Clutches)
  • 입력24 VDC ±10%
  • 출력-3.6 to 90 VDC, with selectable
    current ranges 1/8, 1/4, 1/2 amp maximum

MAGPOWR’s PA-90 and PA-2 Power Amplifiers are designed to provide the extra current required for controlling magnetic particle brakes and clutches in any tension control application. For use with DIGITRAC II, EZ-Trac, or VERSATEC, the PA-90 and PA-2 can be mounted inside the control's enclosure, and receives its control signals directly from the tension control.

The PA-90 is used to control 90 VDC brakes and clutches only, while the PA-2 can be used to control either 24 or 90 VDC units. MAGPOWR’s power amplifiers also include reverse current circuitry as a standard feature, thus allowing greater controllability in the lowest torque range of the clutch or brake being operated.

English

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"