Whether you are working with a wide web or single strand web, the TR-5 Tension Readout from MAGPOWR is an excellent choice. This system can be used on any non-driven idler roll or at any position where the wrap angle of the web or strand does not change. Each load cell contains four foil type strain gages bonded to a sensing beam. These gages convert the load on the roll or sheave to an electrical signal. Within the TR-5, the signal from the load cell(s) is amplified and displayed on the tension meter.
The amplifier of the TR-5 has low drift and high linearity with a gain control range of 8:1 and tare adjustment of 50%. An auxiliary 0 to 10 VDC, or 4 to 20 mADC output is provided for interfacing to other products or systems.
Key Features:
Precision tension meter for direct tension readout
8:1 calibration range
Tare adjustment of 50% sensor rating
Overall system accuracy better than 1%
Auxiliary 0 to 10 VDC or 4 to 20 mADC output
Operates with either one or two sensors
Easy to install and calibrate
Improved productivity by eliminating operator dependency
Improved quality through reproducible correct machine settings
Whether you are working with a wide web or single strand web, the TR-5 Tension Readout from MAGPOWR is an excellent choice. This system can be used on any non-driven idler roll or at any position where the wrap angle of the web or strand does not change. Each load cell contains four foil type strain gages bonded to a sensing beam. These gages convert the load on the roll or sheave to an electrical signal. Within the TR-5, the signal from the load cell(s) is amplified and displayed on the tension meter. 
