1. print icon 印刷

Lightweight Aluminum Dead Shaft Idler Rolls

  • Ideal for low-inertia, low-tension applications
  • Lower break-away torque
  • Reduced web slippage
  • Better tension control
  • Greater sensitivity in transducer applications
  • Reduced bearing side-thrust
  • Same shaft and mount configuration as standard aluminum idlers
  • Low-friction bearings installed
  • Ultra low-friction, oil-lubricated bearings optional

Webex Dead Shaft Lightweight Aluminum Specifications

  • Material6061-T6 aluminum tubing machined for minimum stock removal
  • 低摩擦轴承*Installed in each end of the roller
  • 处理32 Ra
  • Runout and Straightnesswithin the greater of 0.002 inch or 0.0005 inch/foot of length
  • BalancedDynamically balanced to standard specification or your specified line speed

LW-300-100 Specifications

LW-300-100 Dimensions
  • 公称辊径76.2 mm3 inches
  • 壁厚6.35 mm0.25 inches
  • Dynamically Balanced at1,500 FPM
  • 惰辊重量 (磅)1.12 + (0.17 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to72 inches
  • 低摩擦轴承*installed for a 1 inch diameter shaftinstalled for a 25.4 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • LW-300-7519.05 mm0.75 inches
  • LW-300-1251.25 inches

LW-350-100 Specifications

  • 公称辊径88.9 mm3.5 inches
  • 壁厚6.35 mm0.25 inches
  • Dynamically Balanced at1,500 fpm
  • 惰辊重量 (磅)1.81 + (0.20 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to84 inches
  • 低摩擦轴承*installed for a 1 inch diameter shaftinstalled for a 25.4 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • LW-350-7519.05 mm0.75 inches
  • LW-350-1251.25 inches
  • LW-350-1501.50 inches

LW-400-150 Specifications

  • 公称辊径101.6 mm4 inches
  • 壁厚6.35 mm0.25 inches
  • Dynamically Balanced at1,500 fpm
  • 惰辊重量 (磅)4.45 + (0.23 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to90 inches
  • 低摩擦轴承*installed for a 1.25 inch diameter shaftinstalled for a 31.75 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • LW-400-7519.05 mm0.75 inches
  • LW-400-10025.4 mm1 inch
  • LW-400-1251.25 inches

LW-500-150 Specifications

  • 公称辊径127 mm5 inches
  • 壁厚6.35 mm0.25 inches
  • Dynamically Balanced at2,000 fpm
  • 惰辊重量 (磅)5.98 + (0.30 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to100 inches
  • 低摩擦轴承*installed for a 1.25 inch diameter shaftinstalled for a 31.75 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • LW-500-7519.05 mm0.75 inches
  • LW-500-10025.4 mm1 inch
  • LW-500-12531.75 mm1.25 inches
  • LW-500-20050.8 mm2 inches

LW-600-150 Specifications

  • 公称辊径152.4 mm6 inches
  • 壁厚6.35 mm0.25 inches
  • Dynamically Balanced at2,000 fpm
  • 惰辊重量 (磅)7.91 + (0.36 x Inch Face Length) w/o shaft
  • Generally available in Face Lengths up to120 inches
  • 低摩擦轴承*installed for a 1.5 inch diameter shaftinstalled for a 38.1 mm diameter shaft
  • Also Available with Bearings for the Following Shaft Diameters
  • LW-600-7519.05 mm0.75 inches
  • LW-600-10025.4 mm1 inch
  • LW-600-12531.75 mm1.25 inches
  • LW-600-20050.8 mm2 inches

*Other shaft configurations and wall thicknesses optional.

When you need an idler lighter than the standard aluminum models, but stronger than an UltraLight™, take a closer look at Webex LightWeight Aluminum Idlers.

Webex LightWeight Aluminum Idlers offer you the same precision construction and design detail as our standard aluminum idlers — but with half the wall thickness and half the roll weight. Break-away torque is less and roll inertia is lowered. All this gives you a high-performance roll ideal for low tension applications.

In all other ways, Webex LightWeights are directly comparable to our standard aluminum idlers. Both are dead shaft designs using the same steel shafts and low-friction bearings. Both are precision balanced for maximum performance over a wide range of speeds. And both are available as Webex standards — offering you consistent, repeat performance roll to roll and order to order.

Webex Centers of Excellence

State-of-the-art centers of manufacturing excellence for Webex Precision Rolls