1. print icon 인쇄

MAGPOWR ISR Tension Sensing Roller

  • Fast and easy installation
  • Several diameters available between 80 and 152 mm (3.15 to 6 inches)
  • Roller materials in Aluminum, Steel and Stainless Steel
  • Seven load ratings
  • Lengths from 235 to 3000 mm (9.3 to 118.1 inches)
  • Force measurement in positive or negative direction
  • Single bolt mounting on each end
  • Five times overload protection
  • Works with any MAGPOWR tension amplifier or tension control

ISR Tension Sensing Roller Specifications

  • Gage Resistance175 ohms nominal (two 350 ohms full bridges in parallel)
  • Load Cell Excitation10 VDC maximum
  • 출력 시그널1.05 mV/V, 10.5 mVDC maximum
  • Combined Nonlinearity and Hysteresis0.5% of full scale maximum
  • Temperature Effect on Zero0.02% of rating per °C
  • Overload Stops Engagement105% to 200% of full load rating
  • 오퍼레이팅 온도-30 to 80˚ C-22 to 176˚ F
  • Overload Protection5X full load rating
  • Repeatability0.2% of full scale maximum
  • Load Ratings50, 100, 250, 500, 750, 1000, 2200 Newtons 11, 23, 56, 112, 169, 225, 495 pounds
  • 구조Stainless steel center shaft, aluminum, steel and stainless steel roller body
  • Roller Diameters80, 89, 102, 127 and 152 mm3.15, 3.5, 4, 5 and 6 inches
  • Deflection at Full Load0.15 mm to 0.17 mm0.005 to 0.007 inch
  • Climate Class3K3 (EN60721)
  • 승인
    IP54
    CE
    ROHS
  • MAGPOWR Mating Cable
    LCC series with straight connector
    LCCRA series with 90 degree connector

Certifications

The MAGPOWR ISR series is a dead shaft tension sensing roller supported on both sides that uses tension sensors embedded in the roller to provide a signal proportional to tension in any unwind, rewind
or intermediate web processing application.

When installed in place of a standard dead shaft idler roller, the ISR integrated tension sensing roller delivers precise web tension measurement with low temperature drift due to full Wheatstone bridge
construction on each load cell inside the roller.

English

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"