SE-30 Edge Averaging Sensor

  • Averages variations caused by varying opacities, imperfections and voids
  • Immune to web plane changes and unaffected by ambient light, including sunlight
  • Modulated infrared light will not affect photosensitive paper/film
  • Compatible with all Fife web guide controllers
  • Standard sensing gap is 50.8 mm (2 inches) with a control range of 3.8 mm (0.150 inch)
Contact a rep

The SE-30 Edge Averaging Sensor has a control range of 0.150 inch and a sensing area of 2.0 inches. Its long sensing area is designed to measure the lateral position of the guided material, providing an innovative method of averaging irregularities in the web edge.

The advanced features of the SE-30 prevent guiding systems from correcting erroneous web errors caused by varying opacities, small imperfections, or voids, such as in meshtype materials.

2% nominal maximum error2% nominal maximum error
Plane Change
2% nominal maximum error2% nominal maximum error
Temperature Drift
2% nominal maximum error2% nominal maximum error
Power Requirements
10 to 15 VDC at 40 mA10 to 15 VDC at 40 mA
Output Signal
0 to 10 mA0 to 10 mA
32 oz907.18 g
Temperature Range
41 to 140˚ F5 to 60˚ C