DMS Digital Measurement System
Offers accurate knife positioning to reduce setup time and eliminate operator error
Location sensor is unaffected by dust or debris
Easy to retrofit, requires only a few tools to install
Our affordable Digital Measurement System is an extremely accurate and reliable method of measuring slitter knife positions. This easy-to-use system reduces operator error and greatly speeds up repositioning times. For slit widths 508 mm (20 in) and longer, accuracy is within ±0.18 mm (0.007 in), and for slit widths under 508 mm (20 in), accuracy increases to ±0.10 mm (0.004 in) or better.
The Digital Measurement System is simple to install, requiring standard 110V power plus 5.5 bar (80 psi) minimum filtered air supply. It permanently mounts between existing machine frames using two end-mounting blocks supplied with the unit. And the electronic display can be mounted at any position on the machine.
DMS Digital Measurement System
| Knife Positioning Accuracy | Slit Width ≥ 508 +/- 0.18 mmSlit Width ≥ 508 +/- 0.18 mm |
|---|---|
| Knife Positioning Accuracy | Slit Width ≥ 508 +/- 0.18 mmSlit Width ≥ 508 +/- 0.18 mm |
| Power Input | 110 V110 V |
| Filtered Minimum Air Input | 5.5 bar5.5 bar |
Installation Guide
Product Sheets
Request for Quote (RFQ)
- Tag and Label
- Packaging
- Cardboard
- Food and Beverage
- Flexible Packaging
- Pharmaceutical
- Nonwovens
- Battery
- Towel and Tissue
- Specialty Converting
Related Products
D-MAX OI-TS Operator Interface
Performance Series Knifeholder
