SP-500

Dramatically reduced setup time for material changes

Increased operator safety by reducing contact with the blades

Slit recipes can be stored and accessed in seconds from a PLC or HMI

Class 1 available upon request

Industries
  • Battery
  • Cardboard
  • Flexible Packaging
  • Food and Beverage
  • Nonwovens
  • Packaging
  • Pharmaceutical
  • Specialty Converting
  • Tag and Label
  • Towel and Tissue
Contact a rep

Combining decades of slitting and engineering knowledge, the SP-500 automatic slitting positioning system provides a highly-accurate, safe and reliable solution for your slitting needs. When multiple materials or line changes are frequent, the SP-500 quickly returns your investment by not requiring an operator to manually reposition each knifeholder with a tape measure, while increasing safety by not requiring an operator near the knife zone.

Video tutorial

*Dependent on material and application

SP-500 - Class II

Minimum Slit Width
2.00 in50.8 mm
Maximum Designated Speed*
1,676 mpm1,676 mpm
Pneumatic Requirement
80 - 100 psi80 - 100 psi
Electrical Requirement
20 Amps20 Amps
Knife Positioning Accuracy
0.01 in0.2 mm
Knifeholder Positioning Speed
10 knives in approximately 2 minutes10 knives in approximately 2 minutes

SP-500 - Class III

Minimum Slit Width
3.00 in76.2 mm
Maximum Designated Speed*
3,048 mpm3,048 mpm
Pneumatic Requirement
80 - 100 psi80 - 100 psi
Electrical Requirement
20 Amps20 Amps
Knife Positioning Accuracy
0.01 in0.2 mm
Knifeholder Positioning Speed
10 knives in approximately 2 minutes10 knives in approximately 2 minutes