1. print icon Print

MAGPOWR TSU Under Pillow Block Load Cells

  • Rugged industrial construction
  • Positive overload stops in both compression and tension modes of operation
  • Four foil strain gauges in a full Wheatstone Bridge
  • Simple installation
  • Ability to sense actual web tension
  • Load ratings from 50 to 5,000 lbs
  • UL and CE Approved

MAGPOWR TSU Specifications

  • Gage Resistance350 Ω
  • Excitation Voltage10 VDC maximum
  • Output Signal21 mVDC maximum per load cell at full load rating
  • Operating Temperature-30 to 95˚ C-22 to 203˚ F
  • Temperature Effect on Zero0.02% of rating per °C
  • Combined Non-linearity and Hysteresis0.5% of full scale maximum
  • Repeatability0.2% of full scale maximum
  • Overload StopsInternal at 105% to 150% of full load rating
  • Deflection at Full Load23 mm0,91 inches
  • Weight
  • TSU-11,93 kg4 lb
  • TSU-24,76 kg10 lb
  • TSU-316,33 kg36 lb
  • ConnectorKPT02E-10-6P
  • Mating Cable AssemblyUse SCE Cable series
  • Mating Connector Only12B193-6
    (pin A + power; pin B + signal; pin C - signal; pin D - power)

Certifications

Ruggedly constructed to stand up to mill duty and with built-in mechanical overload stops in both force directions, MAGPOWR’s TSU Under Pillow Block Load Cells can be bolted under your present roll support bearings and they will accurately measure the tension forces on the machine sensing the roll created by the web. It can display and control the web tension through MAGPOWR tension readouts and controls.

The TSU is best used with two load cells, one under each pillow block bearing that supports the sensing roll, which then will accurately measure the total force on the entire roll created by tension in the web, and the readout will be precisely displayed no matter what the position of the web.

English

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"