1. print icon Print

Fife SE-26B Digital Line Guide Sensor

  • Small, lightweight sensor for guiding to the center or edge of a line
  • Especially good in applications where contrast between background and printed line is low
  • Provides reliable operation for glossy, reflective, or shiny materials
  • Lens position may be altered to allow the sensor to operate at 90º from standard
  • Flexible mounting and positioning assemblies ensure quick and easy installation
  • Electrostatic discharge protected
  • LED light source provides 100,000 lifetime hours

The SE-26B is a visible white LED light sensor that can be used to guide to the center of a line or to an edge. The sensor provides two output signals to the Fife guiding controller, one for EDGE mode and
one for LINE mode. Featuring 100,000 lifetime hours, the lens and cover components can be unscrewed and interchanged to change the sensing orientation.

Fife SE-26B Line Guide Sensor Specifications

  • Supply Current50 mA, + 12 VDC; 40mA, - 12VDC
  • EnclosureIP65
  • IlluminationWhite LED
  • Climate Class3K3 (EN60721)
  • LED Lifetime Hours100,000
  • Relative Humidity5% to 85% grams
  • Operating Temperature Range-0 to 60˚ C
    -22 to 140° F
  • Storage Temperature-0 to 80° C
    -22 to 176° F
  • Pollution Degree2 (IEC664-1)
  • Output Range-20 mA to +20 mA for line guiding; -20 mA to +10 mA for edge guiding



Maxcess Fife logo

Fife Engineering prepares a customer specific manual for most Fife systems when they ship. To access a copy of your manual, please choose the following link. Doing so will take you out of this website and into the Fife Customer Specific Maintenance Manual login area.

Access Order-Specific Manuals