1. print icon 印刷

Fife DSE-17 Wide Band Infrared Sensor

  • Wide proportional band reduces manual sensor repositioning
  • Tracks up to 4 independent web edges simultaneously
  • Features a contamination monitoring analog signal
  • Optional air sweep available
  • No opacity set-up required
  • Immune to web plane changes
  • Protected against ambient light
  • Displays the edge position and the self-diagnostic results through the built-in LED display
  • Allows small distance to machine frame
  • Can be connected to all available Fife web guide controllers

Fife DSE-17 Sensor Specifications

  • 感应器视野160  mm / 300 mm / 420 mm6.30 inch / 11.81 inch / 16.54 inch
  • 光源Infrared light
  • 波长850 Nm
  • 基片材料Acrylic (PMMA)
  • 工作温度10 to 60˚ C50 to 140˚ F
  • IP保护IP65
  • 重量900  gram / 1,480 gram31.75 oz / 52.21 oz
  • 电源+10 to +28 V
  • 输出信号0 to 10 mA
    (4 to 20  mA optional)
  • 线性度Error less than 1%
  • 平面变化0.5 % maximum error
  • 温度飘移0.5 % maximum error (between 10 ° to 50 ° C)0.5 % maximum error (between 50 ° to 122 ° F)
  • 电缆长度Standard: up to 15 metersOptional: up to 40 metersStandard: up to 49.21 ftOptional: up to 131.23 ft

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile, paper, foil, and for many opaque films. It can track up to 4 independent web edges simultaneously.

When web width variations exist, the wide proportional band of the DSE-17 sensor eliminates the need for the manual repositioning of the sensor.

Thanks to its IP-65 rating the DSE-17 can be installed even in the presence of water spray or condensation. The digital technique is immune to higher levels of contamination, compared with traditional analog sensors. The contamination of the sensor acrylic window can be monitored via a proportional analog output signal. An air sweep system is available as an option. In addition the DSE-17 sensor is protected against the influence of ambient light.

English

Maxcess Fife logo

Fife Engineering prepares a customer specific manual for most Fife systems when they ship. To access a copy of your manual, please choose the following link. Doing so will take you out of this website and into the Fife Customer Specific Maintenance Manual login area.

Access Order-Specific Manuals