1. print icon 印刷

MAGPOWR DTR-65 Digital Tension Readout

  • Small panel usage, 1/8 DIN enclosure (same as DTR)
  • Setup and calibration through keypad and digital display
  • Weightless load cell calibration
  • Outputs and display have fully adjustable and separate digital filtering
  • One push button for re-zeroing, with optional input for remote re-zeroing
  • Alarm output for high tension or low tension or high or low tension
  • Works with 5 and 7.5 volt excitation sensors with 1.5 to 100 mV/V signals
  • 32:1 gain adjustment
  • Automatic load cell diagnostics/fault indicator
  • Powered with 24 VDC or 100 to 240 VAC

MAGPOWR DTR-65 Specifications

  • 输入
  • 张力感应器励磁5 or 7.5 VDC, 100mADC maximum
  • 张力感应器灵敏度1.5 to 100 mV/V single sensor or pair
  • 数据输入(复零)24 VDC maximum, 5 VDC or 24 VDC selectable threshold
  • 输出
  • 模拟0 to 10 VDC, 5mA, 2 kohm minimum load
    4 to 20 mADC, 450 ohm maximum load
  • 基准仪表0 to 1 mADC, 1 kohm maximum load
    or 0 to 10 VDC, open circuit
  • 报警器30 VDC maximum, 0.4 ADC maximum
  • 增益32:1
  • 电源24 VDC, +/- 10%, 0.14 ADC maximum or
    100 to 240 VAC +/- 10%, 50 to 60 HZ, 0.09A
  • 显示4-digit LED
  • 安装1/8 DIN panel mount
  • 气候等级3K3 (EN60721)
  • 工作温度
  • 直流电源0 to 50˚ C32 to 122˚ F
  • 驱动器0 to 45˚ C32 to 113˚ F
  • 仓储温度-20 to 80˚ C-4 to 176˚ F
  • 护罩IP20 (back and sides)
    IP65 (front panel)
  • 证书CE
    TUV Mark (UL61010-10, CAN/CSA-C22.2#
    61010-1, CB to ICE 61010-1)
    RoHS

Certifications

The DTR-65 is an easy choice when needing a tension displayed on a machine panel with the option to also output a tension reference to a drive or PLC for remotely displaying or controlling tension.

A powerful and versatile panel-mounted digital amplifier used to display measured tension locally on a machine panel, the DTR-65 will multiply a millvolt tension signal to a usable 0 to 10 VDC and 4 to 20 mADC analog output.

The DTR-65 is an 1/8 DIN panel mount enclosure that is IP65 protected on the face. It incorporates ease of use and setup with a keypad and a four-segment display, fully programmable low pass filter for each output, tension alarm set points, quick and easy calibration, and even weightless load cell calibration.

Chinese, Simplified

English

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"