1. print icon 인쇄

MAGPOWR CSR Tension Sensing Roller

  • Fast and easy installation
  • Optional readout in end of roll
  • Optional integrated RPM sensor
  • Flange and stud mount
  • Flange mount with through frame pigtail
  • Several diameters available between 80 and 152 mm (3.15 to 6 inches)
  • Roller materials in Aluminum, Steel and Stainless Steel
  • Seven load ratings
  • Lengths from 250 to 1000 mm (9.9 to 39.4 inches)
  • Force measurement in positive or negative direction
  • Optional integrated display offers display of actual tension on end of roller, weightless load cell calibration, 0 to 10 VDC output, digital filter of output and re-zero button
  • Five times overload protection in both force directions
  • Works as a stand-alone unit or with any MAGPOWR tension amplifier or tension control

CSR Tension Sensing Roller Specifications

  • Gage Resistance350 ohms nominal
  • Excitation Voltage10 VDC maximum
  • 출력 시그널2.1 mV/V, 21 mVDC maximum, 0-10 VDC (when powered)
  • Combined Nonlinearity and Hysteresis0.5% of full scale maximum
  • Temperature Effect on Zero0.02% of rating per °C
  • Overload Stops Engagement105% to 200% of full load rating
  • 오퍼레이팅 온도-30 to 60° C-22 to 140˚ F
  • Overload Protection5X full load rating
  • Repeatability0.2% of full scale maximum
  • Load Ratings50, 100, 250, 500, 750, 1000, 2200 Newtons 11, 23, 56, 112, 169, 225, 495 pounds
  • 구조Stainless steel center shaft, aluminum, steel and stainless steel roller body
  • Roller Diameters80, 89, 102, 127 and 152 mm3.15, 3.5, 4, 5 and 6 inches
  • Deflection at Full Load0.15 mm to 0.17 mm0.005 to 0.007 inch
  • Climate Class3K3 (EN60721)
  • 승인
    IP54
    CE
    ROHS
    TUV
  • MAGPOWR Mating Cable
    CSRBL series with straight connector
    CSRCBLRA series with 90 degree connector
  • RPM Pulse Output Switch2 pulses per revolution, 30 VDC maximum, 25 mADC maximum

Certifications

The MAGPOWR CSR series is a cantilevered tension
sensing roller that uses tension sensors embedded in the roller to provide a signal proportional to tension in any unwind, rewind or intermediate web processing application.

When installed in place of a standard machine idler roller, the CSR tension sensing roller delivers precise web tension measurement with low temperature drift due to a full Wheatstone bridge construction on each load cell inside the roller.

English

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"