MAGPOWR Spyder Plus S1

  • Powerful tension control at an affordable price
  • Open Loop, Closed Loop Load Cell and Closed Loop Dancer control in one package
  • Diameter input for precise and adjustable taper tension, dancer gain compensation, advanced inertia compensation and hold level options
  • Parameter access at keypad or via built in Modbus/TCP or web browser
  • Used to control magnetic particle or pneumatic clutches and brakes, or interface directly with drives

MAGPOWR Spyder Plus S1 Specifications

  • ClasseCE
    UL 508C Listed
  • Entrées
  • Jauge de mesure21 mV Maximum
    or two 350 Ω sensors in parallel
  • Arrêt d'urgence, marche/arrêt, arrêt de la tension, automatique et manuel0 VDC to +10 VDC, 0.25 mADC maximum
    or 1k to 10k Ω potentiometer
  • Arrêt d'urgence, marche/arrêt, arrêt de la tension, automatique/manuelSwitch closure or 5 VDC or
    24 VDC active high/low logic, 8 mADC maximum
  • Position rouleau danseur1k to 10k Ω potentiometer, or a 0 to 10 VDC Signal
  • Détecteur laser ou à ultrasons pour l'entrée de diamètre0 to 10 VDC Signal, Required for Open Loop Mode, optional for Load Cell and Dancer Modes
  • Sorties
  • Couple0 to +10 VDC, 1 mADC maximum
    4 to 20 mADC, 500 Ω maximum
    -10 to +10 VDC, 1 mADC maximum
  • Tension alimentation24 VDC, ±10%, 250 mA, 6 VA
  • Plage de température0 to 50˚ C
  • Température de Stockage-30 to 80˚ C
  • BoîtierIP20 (IEC529)
  • Tensiomètre0 to 1 mADC or 0 to +10 VDC analog

Certifications

The new Spyder Plus S1 tension controller has all the existing features of the Spyder Plus controller, while adding an additional input for roll diameter. This input allows for additional powerful features normally reserved for our highest end controllers.

By referencing the actual measured diameter on this new input, this DIN rail mounted low-cost controller now includes very precise taper tension, hold level change options and inertia compensation options in load cell and dancer modes. In addition, gain compensation in dancer mode allows for a stable dancer from full roll to core, regardless of roll-build ratio.

Like the Spyder Plus, the Spyder Plus S1 is a controller that can be configured as an open loop, closed loop load cell or closed loop dancer modes, providing accurate, reliable control by providing feedback to clutches and brakes, or interfacing directly with drives in unwind, rewind or point-to-point applications.

Built in Modbus TCP communications provide the ability to easily interface and share data with an existing PLC, remote PC, HMI or web browser, allowing for remote set point adjustment to further improve efficiency, especially when multiple controls are used in the same process.

anglais

Maxcess MAGPOWR logo

Les ingénieurs MAGPOWR ont développé un logiciel pour vous aider à choisir le meilleur embrayage, frein ou capteur de force pour votre application.Contact us at +1.405.755.1600 pour vérifier la taille ou poser des questions.

Cliquez ici pour télécharger le logiciel.
Si vous cliquez sur le lien et que rien ne se passe, faites un clic droit sur le lien de téléchargement et choisissez "ouvrir dans un nouvel onglet".