WEBEX Stainless Steel Dead Shaft Idlers
Protect your web handling performance in harsh or sensitive environments with WEBEX stainless steel dead shaft idlers. Built from 304 stainless steel and designed for precision, these corrosion-resistant idler rollers are ideal for clean rooms, elevated temperatures, and washdown applications.
Key Benefits:
- 304 stainless steel tubing with precision-machined finish
- Resistant to corrosion, chemicals, and abrasion
- Optional clean room bearing shields and stainless steel shafts
- Operates in temperatures up to 350°F
- Available coatings and grooves for specialized performance
The WEBEX Stainless Steel Dead Shaft Idler by Maxcess is designed to perform in corrosive, abrasive, and high-moisture environments where standard steel rollers fail. Built with 304 stainless steel tubing and precision-machined to exacting standards, this stainless steel dead shaft idler offers strength, corrosion resistance, and clean performance for medical, food-grade, or clean room web handling.
Corrosion Resistance & Long-Term Value
These corrosion-resistant idler rollers are available with clean room bearing shields, stainless steel shafts, and specialized coatings to withstand aggressive conditions. They are dynamically balanced to your line speed and can operate in elevated temperatures up to 350°F. Whether you're managing web tension in a sterile environment or battling abrasive exposure, these rolls deliver repeatable, high-performance results.
Non-Corrosive Materials
Constructed from 304 stainless steel with optional grades available for more aggressive environments. Also compatible with stainless steel shafts and bearings.
Extended Roll Lifespan
High-performance alloy bearings and optional oil-lubricated systems reduce wear and maintain efficiency across repeated cycles and harsh conditions.
Ideal for Moist Environments
Optional clean room shields and corrosion-resistant surfaces make these idlers an ideal solution for food, medical, pharmaceutical, and washdown applications.
Available Coatings
- Electroless Nickel
- Rubber Covering
- High Release Tungsten Carbide (Plasma)
- Chrome Plating
Machined Surface Options
- Reverse Taper, Chevron Groove, Spiral “V” Groove
- Matte Finish, Herringbone Groove, Micro Groove
Common Applications
- Clean room and food-grade lines
- Medical and pharmaceutical web handling
- High-humidity or washdown environments
- Chemical and solvent-heavy processing systems
Request A Quote
Ensure maximum performance and longevity with WEBEX stainless steel dead shaft idlers. Contact Maxcess today to speak with an applications engineer or request a quote.
A-200-075
| Nominal Diameter | 2.050.8 mm |
|---|---|
| Wall Thickness | 1/4 in6.35 mm |
| Balance Speed | 1,000 FPM (dynamically balanced) |
| Face Straightness & Runout | Within the greater of 0.002 in or 0.0005 in/foot of face length |
| Max Face Length | 50 in1270 mm |
| Weight Formula | 1.00 + (0.11 × Face Length in inches) |
| Available Shaft Diameters | 0.75 in19.05 mm |
2.5 x 2
| Finished Roll Diameter | 2.5" -2.36"59.94-63.5mm |
|---|---|
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | Ring Clip Bore (Bearing Protrusion Available) |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | No end cap |
| Approximate weight | 0.1500 Pounds Per Inch (without shaft or bearings) |
3.1 x 1.5
| Finished Roll Diameter (Wide Web) | 3.040 / 2.985 in77.21/75.84 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 3.005 / 2.985 in76.32/75.82 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra0.4, 0.8, 1.6, 3.2 µm |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 0.75 in19.05 mm Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | Standard |
| Approximate Weight | 0.150 Pounds Per Inch (without shaft or bearings) |
3 x 2
| Finished Roll Diameter | 3.140 / 3.050 in79.75/77.47 mm |
|---|---|
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | No end cap |
| Approximate Weight | 0.209 Pounds per Inch (without shaft and bearings) |
3.5 x 2
| Finished Roll Diameter (Wide Web) | 3.570 / 3.470 in |
|---|---|
| Finished Roll Diameter (Narrow Web) | 3.470 / 3.450 in90.68/88.14 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra 0.4, 0.8, 1.6 or 3.2 µm |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | Standard |
| Approximate Weight | .284 Pounds Per Inch (without shaft or bearings) |
4 x 2
| Finished Roll Diameter (Wide Web) | 4.100 / 3.975 in104.14/100.96 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 3.955 / 3.935 in100.45/100.038 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | Standard |
| Approximate Weight | .346 Pounds Per Inch (without shaft and bearings) |
4 x 3
| Finished Roll Diameter (Wide Web) | 4.220 / 4.100 in107.188 /104.14 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 4.100 / 4.080 in104.14/103.63 mm |
| Total Indicator Run Out (TIR) | .0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.5 in, 2.0 in, or 40 mm1.5 in, 2.0 in, or 40 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | No end cap |
| Approximate Weight | 0.443 Pounds Per Inch (without shaft and bearings) |
4.5 x 2
| Finished Roll Diameter (Wide Web) | 4.550 / 4.420 in |
|---|---|
| Finished Roll Diameter (Narrow Web) | 4.330 / 4.310 in |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | Standard |
| Approximate Weight | 0.435 Pounds Per Inch (without shaft and bearings) |
4.5 x 3
| Finished Roll Diameter (Wide Web) | 4.550 / 4.420 in115.57/112.26 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 4.330 / 4.310 in110.0/109.47 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.5 in, 2.0 in, or 40 mm1.5 in, 2.0 in, or 40 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | No end cap |
| Approximate Weight | 0.473 Pounds Per Inch (without shaft or bearings) |
5 x 2
| Finished Roll Diameter (Wide Web) | 5.150 / 5.000 in |
|---|---|
| Finished Roll Diameter (Narrow Web) | 4.955 / 4.935 in130.8/127.00 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | Standard |
| Approximate Weight | .502 Pounds Per Inch (without shaft or bearings) |
5 x 3
| Finished Roll Diameter (Wide Web) | 5.070 in /4.970 in128.77/126.24 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 4.965 / 4.945 in126.04/125.53 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.5 in, 2 in, 40 mm1.5 in, 2 in, 40 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | No end cap |
| Approximate Weight | 0.502 Pounds Per Inch (without shaft or bearings) |
6 x 2
6.190 / 6.000 in157.23/152.4 mm |
|
| Finished Roll Diameter (Narrow Web) | 5.980 / 5.960 in152.15/151.00 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.0 in, 1.25 in, 25 mm1.0 in, 1.25 in, 25 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | Standard |
| Approximate Weight | 0.690 Pounds Per Inch (without shaft or bearings) |
6 x 3
| Finished Roll Diameter (Wide Web) | 6.100 / 5.990 in |
|---|---|
| Finished Roll Diameter (Narrow Web) | 5.970 / 5.950 in151.6/151.13 mm |
| Total Indicator Run Out (TIR) | Finished Roll Diameter (Wide Web) |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.5 in, 2.0 in, 40 mm1.5 in, 2.0 in, 40 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | Standard |
| Approximate Weight | 0.693 Pounds Per Inch (Without shaft and bearings) |
8 x 3
| Finished Roll Diameter (Wide Web) | 8.100 / 7.925 in205.74/201.29 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 7.835 / 7.815 in199.01/198.49 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (0.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.5 in, 2.0 in, 40 mm1.5 in, 2.0 in, 40 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995/ 0.9985) |
| End Cap | Standard |
| Approximate Weight | 1.265 Pounds Per Inch (Without shaft and bearings) |
10 x 3
| Finished Roll Diameter (Wide Web) | 10.100 / 9.900 in256.54/251.46 mm |
|---|---|
| Finished Roll Diameter (Narrow Web) | 9.850 / 9.830 in250.19 /249.65 mm |
| Total Indicator Run Out (TIR) | 0.0005 Per Foot (.002 Min) Ra |
| Surface Finish | 16, 32, 64, or 125 ra16, 32, 64, or 125 ra |
| Bore Available | WINlock Bore |
| Bearing Sizes Available | 1.5 in, 2.0 in, 40 mm1.5 in, 2.0 in, 40 mm |
| Bearing Type | Self Adjusting, ER, Free Spin |
| Balanced to Spec G6.3 | 2000 FPM (or as specified) |
| Shaft Diameter Tolerance | -0.0005 / -0.0015 (Ex: 1.0" = 0.9995 / 0.9985) |
| End Cap | Standard |
| Approximate Weight | 1.481 Pounds Per Inch (Without shaft and bearings) |
- Bateria
- Farmaceutyczny
- Karton
- Konwersja specjalistyczna
- Opakowania
- Opakowania elastyczne
- Tag i etykieta
- Żywność i napoje
Related Products
FIFE-500 Web Guiding System
Leverage the latest in web guiding technology and improve efficiency with the cost-effective FIFE-500, ideal for narrow web and nonwoven applications.
Control Series Electronic Knifeholders
Maximize operator safety, productivity and roll quality with Tidland’s Control Series. Features include an LED-backlit touchscreen interface, enhanced durability and available wireless operation.
Force5 Lightweight Air Chuck
The Force5 is incredibly durable in extreme conditions, retains its shape over time and is lightweight, making it an excellent alternative to aluminum chucks at the lowest market cost.
TS Load Cells
TS load cells provide the most consistent tension control regardless of temperature changes. They’re rugged and highly accurate, measuring tension in any unwind, rewind or intermediate web processing application.