Sensors Maxcess Fife logo

Infrared Sensors

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile,...

The SE-11 is the smallest of our infrared sensors. Its compact size and light weight make this sensor ideal for applications where accuracy is required, but space is limited. The SE-11 has a...

Dependable and versatile, the SE-22 is our most popular infrared sensor. Used primarily as an edge guide sensor, the SE-22 performs equally as well in center guiding applications. It can also be...

The SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm...

The SE-30 Edge Averaging Sensor has a control range of 0.150 inch and a sensing area of 2.0 inches. Its long sensing area is designed to measure the lateral position of the guided material,...

The SE-32 Fiber-Optic Sensor is specifically designed for use in high-temperature environments. By utilizing the latest in fiber-optic technology, this sensor can deliver accurate performance in...

The SE-33 Carpet Tuft Sensor utilizes fiber-optic technology to determine carpet tuft position, rather than the edge of the carpet backing. Additionally, the unique design of the SE-33 enables it...

The SE-38 First*Edge Sensor is an all-digital web sensor specifically designed or materials with varying opacities. Such voids, common with spun bond and loosely woven materials, are often...

The SE-42 Sensor uses modulate infrared light. It's light weight, small size and insensitivity to ambient light make it ideal for most web guiding applications

The SE - 42 Infrared Sensor...

Ultrasonic Sensors

Our smallest ultrasonic sensor, the SE-31 is ideal for guiding both clear and opaque materials. This temperature stabilized sensor is unaffected by optical variation or ambient light, eliminating...

The SE-31-IS Ultrasonic Sensor is specifically designed to perform in hazardous locations, Class I, Division 1, Groups C & D. Ideal for guiding thin or clear films, as well as most opaque webs...

Temperature stabilized, this sensor is ideal for guiding both clear films and most opaque webs. Because the SE-37 is unaffected by optical variation or ambient light, it eliminates the need for...

The sensor SE-44 uses ultrasonic sound to detect the web edge. Its light weight, small size, and insensitivity to ambient light make it ideal for most web guiding applications.
The SE-44...

Demanding materials, multiple webs and web width variation are easy to control when you have the right sensor for the job. For years, Fife has delivered a complete family of durable, reliable...

Line Guide and other Optical Sensors

The SE-46C digital line sensor is capable of detecting lines, edges of lines and graphic patterns such as barcodes. It can also be used in low contrast conditions or with different patterns...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

The SE-26 Line Guide Sensor is a compact, easy to use, center-of-line or edge-of-line sensor capable of reliable operations on smooth, rough, matte, or shiny web surfaces. This sensor is...

Visible Light and Laser Sensors

Small, yet accurate, the SE-15 Visible Light Sensor is perfect for web applications where exact guiding is required and space is limited. With a control range of 10.2 mm (0.4 inch), this compact,...

This heavy-duty sensor is engineered for gaps up to 4000 mm. Using a pulsed LED, the wide-gap sensor is unaffected by ambient light, making it ideal for highly reflective strips.

This durable sensor from Fife provides superior performance in the harshest of environments. Perfect for applications where steam and oil vapors are present.

Pneumatic Sensors

These small, versatile sensors are best suited for guiding most types of clear and opaque webs. The SP-5 has a built-in 0.05” (1.27 mm) dead band for guiding webs that have uneven or ragged edges...

Accurate. Durable. Flexible. Designed for use with Fife’s pneumohydraulic power units and control systems, these sensors are used to guide all varieties of webs, especially opaque and clear films...

Ruggedly built for the most physically demanding applications, these sensors are used to accurately guide most types of materials, especially opaque webs and clear films. The two sensors are...

The SP-13 and SM-1760 are feeler-palm pneumatic sensors that have an extended arm, which physically contacts the edge of the web. The SM-1760 is used to accurately guide many types of slow-moving...

Wide Band Sensors

Demanding materials, multiple webs and web width variation are easy to control when you have the right sensor for the job. For years, Fife has delivered a complete family of durable, reliable...

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile,...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

The SE-34 Lazer*Wide Sensor is designed for applications where sensor repositioning due to variations in web materials, variable web widths, and multiple job width changes are required. This...

Sensors for Opaque Material

The SE-11 is the smallest of our infrared sensors. Its compact size and light weight make this sensor ideal for applications where accuracy is required, but space is limited. The SE-11 has a...

Small, yet accurate, the SE-15 Visible Light Sensor is perfect for web applications where exact guiding is required and space is limited. With a control range of 10.2 mm (0.4 inch), this compact,...

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile,...

Dependable and versatile, the SE-22 is our most popular infrared sensor. Used primarily as an edge guide sensor, the SE-22 performs equally as well in center guiding applications. It can also be...

The SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm...

Our smallest ultrasonic sensor, the SE-31 is ideal for guiding both clear and opaque materials. This temperature stabilized sensor is unaffected by optical variation or ambient light, eliminating...

The SE-31-IS Ultrasonic Sensor is specifically designed to perform in hazardous locations, Class I, Division 1, Groups C & D. Ideal for guiding thin or clear films, as well as most opaque webs...

The SE-32 Fiber-Optic Sensor is specifically designed for use in high-temperature environments. By utilizing the latest in fiber-optic technology, this sensor can deliver accurate performance in...

The SE-34 Lazer*Wide Sensor is designed for applications where sensor repositioning due to variations in web materials, variable web widths, and multiple job width changes are required. This...

Temperature stabilized, this sensor is ideal for guiding both clear films and most opaque webs. Because the SE-37 is unaffected by optical variation or ambient light, it eliminates the need for...

The SE-42 Sensor uses modulate infrared light. It's light weight, small size and insensitivity to ambient light make it ideal for most web guiding applications

The SE - 42 Infrared Sensor...

Demanding materials, multiple webs and web width variation are easy to control when you have the right sensor for the job. For years, Fife has delivered a complete family of durable, reliable...

Sensors for Transparent Materials

The sensor SE-44 uses ultrasonic sound to detect the web edge. Its light weight, small size, and insensitivity to ambient light make it ideal for most web guiding applications.
The SE-44...

Our smallest ultrasonic sensor, the SE-31 is ideal for guiding both clear and opaque materials. This temperature stabilized sensor is unaffected by optical variation or ambient light, eliminating...

The SE-31-IS Ultrasonic Sensor is specifically designed to perform in hazardous locations, Class I, Division 1, Groups C & D. Ideal for guiding thin or clear films, as well as most opaque webs...

Temperature stabilized, this sensor is ideal for guiding both clear films and most opaque webs. Because the SE-37 is unaffected by optical variation or ambient light, it eliminates the need for...

Demanding materials, multiple webs and web width variation are easy to control when you have the right sensor for the job. For years, Fife has delivered a complete family of durable, reliable...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

The SE-46C digital line sensor is capable of detecting lines, edges of lines and graphic patterns such as barcodes. It can also be used in low contrast conditions or with different patterns...

Sensors for Woven Material

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile,...

Dependable and versatile, the SE-22 is our most popular infrared sensor. Used primarily as an edge guide sensor, the SE-22 performs equally as well in center guiding applications. It can also be...

The SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm...

The SE-30 Edge Averaging Sensor has a control range of 0.150 inch and a sensing area of 2.0 inches. Its long sensing area is designed to measure the lateral position of the guided material,...

The SE-38 First*Edge Sensor is an all-digital web sensor specifically designed or materials with varying opacities. Such voids, common with spun bond and loosely woven materials, are often...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

Sensors for Nonwoven Material

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile,...

Small, yet accurate, the SE-15 Visible Light Sensor is perfect for web applications where exact guiding is required and space is limited. With a control range of 10.2 mm (0.4 inch), this compact,...

The SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm...

The SE-38 First*Edge Sensor is an all-digital web sensor specifically designed or materials with varying opacities. Such voids, common with spun bond and loosely woven materials, are often...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

Sensors for Printed Material

The SE-26 Line Guide Sensor is a compact, easy to use, center-of-line or edge-of-line sensor capable of reliable operations on smooth, rough, matte, or shiny web surfaces. This sensor is...

The SE-46C digital line sensor is capable of detecting lines, edges of lines and graphic patterns such as barcodes. It can also be used in low contrast conditions or with different patterns...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

Sensors for Carpet

Small, yet accurate, the SE-15 Visible Light Sensor is perfect for web applications where exact guiding is required and space is limited. With a control range of 10.2 mm (0.4 inch), this compact,...

The SE-33 Carpet Tuft Sensor utilizes fiber-optic technology to determine carpet tuft position, rather than the edge of the carpet backing. Additionally, the unique design of the SE-33 enables it...

The SE-34 Lazer*Wide Sensor is designed for applications where sensor repositioning due to variations in web materials, variable web widths, and multiple job width changes are required. This...

Fife Sensors by Product Number

The SE-11 is the smallest of our infrared sensors. Its compact size and light weight make this sensor ideal for applications where accuracy is required, but space is limited. The SE-11 has a...

Small, yet accurate, the SE-15 Visible Light Sensor is perfect for web applications where exact guiding is required and space is limited. With a control range of 10.2 mm (0.4 inch), this compact,...

The DSE-17 is a digital wide proportional band infrared sensor. The sensor is most suitable for applications where opacity or density variations may occur, such as tissue, non-woven, textile,...

This heavy-duty sensor is engineered for gaps up to 4000 mm. Using a pulsed LED, the wide-gap sensor is unaffected by ambient light, making it ideal for highly reflective strips.

This durable sensor from Fife provides superior performance in the harshest of environments. Perfect for applications where steam and oil vapors are present.

Dependable and versatile, the SE-22 is our most popular infrared sensor. Used primarily as an edge guide sensor, the SE-22 performs equally as well in center guiding applications. It can also be...

The SE-23 Infrared Sensor delivers the unique combination of compact design and wide band versatility. This sensor has a control range of 50.8 mm (2.0 inches) and a standard sensing gap of 50.8 mm...

The SE-26 Line Guide Sensor is a compact, easy to use, center-of-line or edge-of-line sensor capable of reliable operations on smooth, rough, matte, or shiny web surfaces. This sensor is...

The SE-30 Edge Averaging Sensor has a control range of 0.150 inch and a sensing area of 2.0 inches. Its long sensing area is designed to measure the lateral position of the guided material,...

The SE-31-IS Ultrasonic Sensor is specifically designed to perform in hazardous locations, Class I, Division 1, Groups C & D. Ideal for guiding thin or clear films, as well as most opaque webs...

Our smallest ultrasonic sensor, the SE-31 is ideal for guiding both clear and opaque materials. This temperature stabilized sensor is unaffected by optical variation or ambient light, eliminating...

The SE-32 Fiber-Optic Sensor is specifically designed for use in high-temperature environments. By utilizing the latest in fiber-optic technology, this sensor can deliver accurate performance in...

The SE-33 Carpet Tuft Sensor utilizes fiber-optic technology to determine carpet tuft position, rather than the edge of the carpet backing. Additionally, the unique design of the SE-33 enables it...

The SE-34 Lazer*Wide Sensor is designed for applications where sensor repositioning due to variations in web materials, variable web widths, and multiple job width changes are required. This...

Temperature stabilized, this sensor is ideal for guiding both clear films and most opaque webs. Because the SE-37 is unaffected by optical variation or ambient light, it eliminates the need for...

The SE-38 First*Edge Sensor is an all-digital web sensor specifically designed or materials with varying opacities. Such voids, common with spun bond and loosely woven materials, are often...

Demanding materials, multiple webs and web width variation are easy to control when you have the right sensor for the job. For years, Fife has delivered a complete family of durable, reliable...

The SE-46C digital line sensor is capable of detecting lines, edges of lines and graphic patterns such as barcodes. It can also be used in low contrast conditions or with different patterns...

The SE-42 Sensor uses modulate infrared light. It's light weight, small size and insensitivity to ambient light make it ideal for most web guiding applications

The SE - 42 Infrared Sensor...

The sensor SE-44 uses ultrasonic sound to detect the web edge. Its light weight, small size, and insensitivity to ambient light make it ideal for most web guiding applications.
The SE-44...

The DAC-005 Diode Array Camera Sensor is the ideal solution for a wide range of difficult to sense materials from nonwovens to steel. The camera utilizes a total of 7,725 pixels and it can split...

Accurate. Durable. Flexible. Designed for use with Fife’s pneumohydraulic power units and control systems, these sensors are used to guide all varieties of webs, especially opaque and clear films...

These small, versatile sensors are best suited for guiding most types of clear and opaque webs. The SP-5 has a built-in 0.05” (1.27 mm) dead band for guiding webs that have uneven or ragged edges...

The SP-13 and SM-1760 are feeler-palm pneumatic sensors that have an extended arm, which physically contacts the edge of the web. The SM-1760 is used to accurately guide many types of slow-moving...

Ruggedly built for the most physically demanding applications, these sensors are used to accurately guide most types of materials, especially opaque webs and clear films. The two sensors are...

Resources

Maxcess Fife logo

Fife Engineering prepares a customer specific manual for most Fife systems when they ship. To access a copy of your manual, please choose the following link. Doing so will take you out of this website and into the Fife Customer Specific Maintenance Manual login area.

Access Order-Specific Manuals