1. print icon Print

Fife SE-30 Edge Averaging Sensor

  • Averages variations caused by varying opacities, imperfections and voids
  • Immune to web plane changes and unaffected by ambient light, including sunlight
  • Modulated infrared light will not affect photosensitive paper/film
  • Compatible with all Fife web guide controllers
  • Standard sensing gap is 50.8 mm (2 inches) with a control range of 3.8 mm (0.150 inch)
  • Flexible mounting and positioning assemblies to ensure quick and easy installation
  • Electrostatic discharge protection

The SE-30 Edge Averaging Sensor has a control range of 0.150 inch and a sensing area of 2.0 inches. Its long sensing area is designed to measure the lateral position of the guided material, providing an innovative method of averaging irregularities in the web edge.

The advanced features of the SE-30 prevent guiding systems from correcting erroneous web errors caused by varying opacities, small imperfections, or voids, such as in meshtype materials.

Fife SE-30 Specifications

  • Linearity2% nominal maximum error
  • Plane Change2% nominal maximum error
  • Temperature Drift2% nominal maximum error
  • Power Requirements10 to 15 VDC at 40 mA
  • Output Signal0 to 10 mA
  • Weight907.18 g32 oz
  • Temperature Range5 to 60˚ C41 to 140˚ F


Maxcess Fife logo

Fife Engineering prepares a customer specific manual for most Fife systems when they ship. To access a copy of your manual, please choose the following link. Doing so will take you out of this website and into the Fife Customer Specific Maintenance Manual login area.

Access Order-Specific Manuals