1. print icon Print

Tidland Control Series Electronic Knifeholders

  • All-electronic knifeholders with 360 blade guard minimize operator intervention and maximize the safety of your slitting operation
  • Auto-calibration of side force and blade overlap increases slit accuracy and consistency, reducing scrap
  • LED-backlit touchscreen is easy to use, even with gloved hands
  • Available in two models, Control and Control Plus
  • Control Plus adds closed-loop side force control and real-time monitoring to ensure settings are maintained
  • Knifeholder can be controlled locally or via easy-to-use HMI
  • Available wireless operation from any Wi-Fi enabled device

Tidland Control Series Class II and III

  • Class II
  • Minimum Slit Width50.8 mm2 inches
  • Maximum Designated Speed*1,676 mpm
  • Blade Diameter150 mm5.91 inches
  • Electrical Requirement24 VDC
  • Auto-Calibrate Accuracy+/- 0.5 lbs side force
    +/- 0.003 inch down stroke
  • Class III
  • Minimum Slit Width75 mm2.95 inches
  • Maximum Designated Speed*3,000 mpm
  • Blade Diameter200 mm7.87 inches
  • Electrical Requirement24 VDC
  • Auto-Calibrate Accuracy+/- 0.5 lbs side force
    +/- 0.003 inch down stroke

*Dependent upon material and application.

Certifications

Maximize operator safety, productivity and roll quality with Tidland’s newest innovation in slitting. Featuring an LED-backlit touchscreen interface, enhanced durability and available wireless operation, the Control Series offers a dramatic improvement in knifeholder technology.

Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.