Tidland Control Series Electronic Knifeholders

  • All-electronic knifeholders with 360 blade guard minimize operator intervention and maximize the safety of your slitting operation
  • Auto-calibration of side force and blade overlap increases slit accuracy and consistency, reducing scrap
  • LED-backlit touchscreen is easy to use, even with gloved hands
  • Available in two models, Control and Control Plus
  • Control Plus adds closed-loop side force control and real-time monitoring to ensure settings are maintained
  • Knifeholder can be controlled locally or via easy-to-use HMI
  • Available wireless operation from any Wi-Fi enabled device

Tidland e-Knifeholder 사양

  • Class II
  • 최소 슬리트 폭50.8 mm2 inches
  • 최대 규정속도*1,676 mpm
  • 블레이드 직경150 mm5.91 inches
  • 필요 전력24 VDC
  • 오토 캘리브레이트 정확도+/- 0.5 lbs side force
    +/- 0.003 inch down stroke
  • Class III
  • 최소 슬리트 폭75 mm2.95 inches
  • 최대 규정속도*3,000 mpm
  • 블레이드 직경200 mm7.87 inches
  • 필요 전력24 VDC
  • 오토 캘리브레이트 정확도+/- 0.5 lbs side force
    +/- 0.003 inch down stroke

*소재와 어플리케이션에 따라 달라집니다.

Certifications

Maximize operator safety, productivity and roll quality with Tidland’s newest innovation in slitting. Featuring an LED-backlit touchscreen interface, enhanced durability and available wireless operation, the Control Series offers a dramatic improvement in knifeholder technology.

Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.

The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.