1. print icon Print

MAGPOWR DTR-65 Digital Tension Readout

  • Small panel usage, 1/8 DIN enclosure (same as DTR)
  • Setup and calibration through keypad and digital display
  • Weightless load cell calibration
  • Outputs and display have fully adjustable and separate digital filtering
  • One push button for re-zeroing, with optional input for remote re-zeroing
  • Alarm output for high tension or low tension or high or low tension
  • Works with 5 and 7.5 volt excitation sensors with 1.5 to 100 mV/V signals
  • 32:1 gain adjustment
  • Automatic load cell diagnostics/fault indicator
  • Powered with 24 VDC or 100 to 240 VAC

MAGPOWR DTR-65 Specifications

  • Input
  • Load Cell Excitation5 or 7.5 VDC, 100mADC maximum
  • Load Cell Sensitivity1.5 to 100 mV/V single sensor or pair
  • Digital Input (re-zero)24 VDC maximum, 5 VDC or 24 VDC selectable threshold
  • Output
  • Analog 0 to 10 VDC, 5mA, 2 kohm minimum load
    4 to 20 mADC, 450 ohm maximum load
  • Reference Meter0 to 1 mADC, 1 kohm maximum load
    or 0 to 10 VDC, open circuit
  • Alarm30 VDC maximum, 0.4 ADC maximum
  • Gain32:1
  • Power Supply24 VDC, +/- 10%, 0.14 ADC maximum or
    100 to 240 VAC +/- 10%, 50 to 60 HZ, 0.09A
  • Display4-digit LED
  • Mounting1/8 DIN panel mount
  • Climate Class3K3 (EN60721)
  • Operating Temperature
  • DC Supply0 to 50˚ C32 to 122˚ F
  • AC Supply0 to 45˚ C32 to 113˚ F
  • Storage Temperature-20 to 80˚ C-4 to 176˚ F
  • EnclosureIP20 (back and sides)
    IP65 (front panel)
  • CertificationsCE
    TUV Mark (UL61010-10, CAN/CSA-C22.2#
    61010-1, CB to ICE 61010-1)
    RoHS

Certifications

The DTR-65 is an easy choice when needing a tension displayed on a machine panel with the option to also output a tension reference to a drive or PLC for remotely displaying or controlling tension.

A powerful and versatile panel-mounted digital amplifier used to display measured tension locally on a machine panel, the DTR-65 will multiply a millvolt tension signal to a usable 0 to 10 VDC and 4 to 20 mADC analog output.

The DTR-65 is an 1/8 DIN panel mount enclosure that is IP65 protected on the face. It incorporates ease of use and setup with a keypad and a four-segment display, fully programmable low pass filter for each output, tension alarm set points, quick and easy calibration, and even weightless load cell calibration.

English

Chinese, Simplified

Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"