MAGPOWR Digital Tension Meter

Easy to read LCD
Built-in scaling
Auto zeroing circuit
Compact enclosure fits DIN standard cut-out
NEMA 4X/IP65 sealed front panel bezel
Wire connections made via screw clamp type terminals

MAGPOWR DTM Specifications

Display3 1⁄2 digit (-9999 to 9999), Minus (-) sign is displayed when current is negative
Power9 to 28 VDC @ 35 mA max Above 26 VDC, derate operating temperature to 50° C
Accuracy(@ 23° C, less than 85% RH) ±(0.1% + 1 digit)
Input10 mA maximum
Range of ± 1.000 mADC
Reading Rate2.5 readings per second
Response Time1.5 seconds for a step change
Input Impedance200 MΩ

A low-cost way to monitor tension output, the Digital Tension Meter (DTM) is perfect for applications where access to tension control parameters is not required. Operators can mount a control away from the web to get feedback on current web tension via a backlit display and illuminated digits. The DTM is encased in high-impact plastic to withstand demanding conditions. A sealed front panel meets industry-standard NEMA 4X/IP65 specifications for wash-down and dusty environments.
This meter can be used with any tension sensor amplifier by reading the 0 to 1 mA meter output reference.

English

Chinese, Simplified

Digital Tension Meter Installation Manual: MAGPOWR

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"