Control Series Electronic Knifeholder
Maximize operator safety, productivity and roll quality
All-electronic knifeholder with intuitive color touchscreen
Auto-calibration of side force and blade overlap increases slit accuracy and consistency, reducing scrap
- Battery
- Cardboard
- Flexible Packaging
- Food and Beverage
- Nonwovens
- Packaging
- Pharmaceutical
- Specialty Converting
- Tag and Label
- Towel and Tissue
Maximize operator safety, productivity and roll quality with Tidland’s newest innovation in slitting. Featuring an LED-backlit touchscreen interface, enhanced durability and available wireless operation, the Control Series offers a dramatic improvement in knifeholder technology.
Available in two models, Control and Control Plus, both allow setup in seconds without operator intervention, resulting in increased consistency, less blade wear and reduced downtime between runs.
The Control Plus model adds closed-loop side force control and real-time monitoring via the onboard touchscreen or PC interface so that settings can be confirmed and consistently maintained.
*Dependent upon material and application.
Control Series Electronic Knifeholder - Class II
| Minimum Slit Width | 2.00 in50.8 mm |
|---|---|
| Maximum Designated Speed* | 1,676 mpm1,676 mpm |
| Blade Diameter | 5.91 in150 mm |
| Electrical Requirement | 24 VDC24 VDC |
| Auto-Calibrate Accuracy | +/- 0.5 lbs side force +/- 0.003 in down stroke+/- 0.5 lbs side force +/- 0.003 in down stroke |
Control Series Electronic Knifeholder - Class III
| Minimum Slit Width | 2.95 in75 mm |
|---|---|
| Maximum Designated Speed* | 3,000 mpm3,000 mpm |
| Blade Diameter | 7.87 in200 mm |
| Electrical Requirement | 24 VDC24 VDC |
| Auto-Calibrate Accuracy | +/- 0.5 lbs side force +/- 0.003 in down stroke+/- 0.5 lbs side force +/- 0.003 in down stroke |
Related Products
FIFE-500 Web Guiding System
Knifeholder Accessories
DTR-65 Digital Tension Readout
