D-MAX Operator Interface

Access from any PLC over DeviceNet, Ethernet Modbus TCP/IP, EtherNet/IP, Profibus, Profinet, CC Link, and CANopen
Maximum application flexibility through the 3 different operator interfaces available
The D-MAX OI-N network operator interface expands the communication capabilities of the D-MAX controller to a wide range of industrial communication protocols, such as Ethernet Modbus TCP/IP, EtherNet/IP, DeviceNet, ProfiBus and many others, for easy integration with the machine PLC or PC.
Backwards compatible to CDP-01, CSP-01, SV-01, A9
Display feedback as text (OI-N, OI-B), guiding nomenclature and web guide graphics

D-MAX Operator Interface (OI-N) Specifications

Weight0.87 kg2 lb
Operating Temperature0 to 60˚ C32 to 140˚ F
Mounting OptionsBezel or Remote Mount
Display320 x 240 pixels, QVGA Graphic LCD
Viewing Area122 x 92 mm
Display Resolution (dot pitch)0.36 mm0.01 inches
Communication TypeEmbedded: Ethernet IP, Modbus TCP, Profinet
With Card: ControlNet, DeviceNet, Ethernet Modbus TCP-IP,
EtherNet/IP, Profibus, CANopen
IP ProtectionIP54 (Bezel or Enclosure), IP40 (Wall Mount)
Display FeedbackText, Guiding Nomenclature & Web Guide Graphics

D-MAX Operator Interface (OI-S) Specifications

Weight277 g9.77 oz
Size110 x 110 mm
Operating Temperature0 to 60˚ C32 to 140˚ F
Mounting OptionsWall or Panel Mount

The D-MAX system offers different Operator Interfaces to better fit the requirements of each application.

Ideal for the most complex, networked applications, the D-MAX Network Operator Interface (OI-N) displays text, guiding nomenclature, and web guide graphics on a large Graphic LCD and offers the possibility to control up to 10 independent control loops out of a single operator interface.

A lighter version, the basic Operator Interface (OI-B) is suitable for simpler applications and communicates directly to a D-MAX controller single or dual-drive configuration with the advantage of not requiring a separate 24V power supply line being powered over the Ethernet connection (POE).

NETWORK OPERATOR INTERFACE (OI-N)
• Ability to interface with multiple guide controllers
• Configured with a 5-port Ethernet switch for guide networking and/or communication uplink to additional OI-N’ s
• Industry standard network card for communication with machine PLCs and PCs with field protocols such as Ethernet Modbus TCP/IP, EtherNet/IP, DeviceNet, ProfiBus and many others, for easy integration with the machine PLC or PC.
• CompactCom port for communication with Programmable Logic Controllers (PLC)

English

Italian

Fife Engineering prepares a customer specific manual for most Fife systems when they ship. To access a copy of your manual, please choose the following link. Doing so will take you out of this website and into the Fife Customer Specific Maintenance Manual login area.

Access Order-Specific Manuals