MAGPOWR Spyder Plus S1

  • Powerful tension control at an affordable price
  • Open Loop, Closed Loop Load Cell and Closed Loop Dancer control in one package
  • Diameter input for precise and adjustable taper tension, dancer gain compensation, advanced inertia compensation and hold level options
  • Parameter access at keypad or via built in Modbus/TCP or web browser
  • Used to control magnetic particle or pneumatic clutches and brakes, or interface directly with drives

MAGPOWR Spyder Plus S1 Specifications

  • 승인CE
    UL 508C Listed
  • 입력
  • 로드셀21 mV Maximum
    or two 350 Ω sensors in parallel
  • 텐션 세트포인트 과 매뉴얼 세트포인트0 VDC to +10 VDC, 0.25 mADC maximum
    or 1k to 10k Ω potentiometer
  • 비상정지, 작동/정지, 텐션 오프, 오토/메뉴얼Switch closure or 5 VDC or
    24 VDC active high/low logic, 8 mADC maximum
  • 댄서 포지션1k to 10k Ω potentiometer, or a 0 to 10 VDC Signal
  • 초음파 또는 레이져 센서에 대한 다이아메터 입력값0 to 10 VDC Signal, Required for Open Loop Mode, optional for Load Cell and Dancer Modes
  • 출력
  • 토르크0 to +10 VDC, 1 mADC maximum
    4 to 20 mADC, 500 Ω maximum
    -10 to +10 VDC, 1 mADC maximum
  • 서플라이 전압24 VDC, ±10%, 250 mA, 6 VA
  • 오퍼레이팅 온도0 to 50˚ C
  • Storage Temperature-30 to 80˚ C
  • 언클로저IP20 (IEC529)
  • 텐션 미터0 to 1 mADC or 0 to +10 VDC analog


The new Spyder Plus S1 tension controller has all the existing features of the Spyder Plus controller, while adding an additional input for roll diameter. This input allows for additional powerful features normally reserved for our highest end controllers.

By referencing the actual measured diameter on this new input, this DIN rail mounted low-cost controller now includes very precise taper tension, hold level change options and inertia compensation options in load cell and dancer modes. In addition, gain compensation in dancer mode allows for a stable dancer from full roll to core, regardless of roll-build ratio.

Like the Spyder Plus, the Spyder Plus S1 is a controller that can be configured as an open loop, closed loop load cell or closed loop dancer modes, providing accurate, reliable control by providing feedback to clutches and brakes, or interfacing directly with drives in unwind, rewind or point-to-point applications.

Built in Modbus TCP communications provide the ability to easily interface and share data with an existing PLC, remote PC, HMI or web browser, allowing for remote set point adjustment to further improve efficiency, especially when multiple controls are used in the same process.



Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

Click here to download the software.
If you click on the link and nothing happens, right click on the download link and choose "open in new tab"